Kimono: switch on, remote and washing

For the Kimo-Yes kimono with two controllers, one in the pockets on each side.

Switch on and off

1. Find the USB cables in or by the pockets on both sides.
2. Connect a USB power bank to each plug.
3. Nothing lights up? The light was switched off before. Switch it back on with the remote.

To switch off, unplug the power banks or press OFF on the remote.

The remote

Out of the box, the kimono responds to any remote of this kind. Which buttons work and how to pair it is in the Basic Controller 4 guide.

The lights go off after a short time

Most likely the power bank has switched itself off. Some power banks turn off after about a minute when the kimono draws little power. Blinking uses the least power and steady light the most, so choose an animation that is lit more often than dark, or use a NEBULITE power bank with a very low auto-off limit.

Washing

1. Take the controllers out of the pockets on both sides. Disconnect them on both sides by pressing the black plastic latch and pulling.
2. Empty all the pockets, including the remote.
3. Wash the kimono by hand or on the delicates programme: no more than 30 °C and 400 rpm, separately.
4. No tumble dryer. It must be completely dry before you reconnect the controllers.

Instructions to print

• KimonoInstructions in English PDF, 0.1 MB · in German PDF, 0.1 MB