LED fanny packs: choosing a size and getting started

Wear the hello. Your NEBULITE LED fanny pack can come along for a festival, a club night or an evening out. Start by choosing a size for what you carry, then use the instructions for your pack’s controller.

Slim or Medium?

The current Fanny Pack product page lists two sizes. The measurements below are the listed height × width × depth; compare them with a bag you already use when choosing.

Slim (S)

Listed dimensions: 15 × 22 × 7 cm (height × width × depth). Compare Classic Slim and Wavy Slim.

Medium (M)

Listed dimensions: 18 × 28 × 10 cm (height × width × depth). Compare Classic Medium and Wavy Medium.

Slim has a more compact profile. Medium is taller and wider. Check the things you plan to carry, including the power source specified for your pack. Classic and Wavy are fabric choices; the fabric name does not identify a controller generation. The linked product page shows the current price and availability of each exact variant.

Try your pack before heading out

1. Charge and switch on the power bank or power source specified in your included instructions.
2. Connect it with the original cable for that model. Check that both ends are fully seated.
3. Follow the included controller instructions to switch on the lights and check brightness.
4. Use the app named in those instructions. If your Fanny Pack 4 instructions point to basic5, the printed basic5 setup link takes you to its guide.

Different NEBULITE controller generations use different connections and apps. Choose the instructions from the controller label and supplied manual rather than from a similar-looking product. The switch-on checklist also covers power and cable checks.

Cleaning and care

Follow the care label and instructions supplied with your exact pack before cleaning. Disconnect power and follow the specified electronics-removal steps. Keep batteries, connectors and electronics dry. If the instructions are missing, contact us before washing.

Need help with your existing pack?

Email support@nebulite.berlin with your order number and a clear controller-label photo if you have not already sent them. Tell us which original cable and power source you are using. We can then identify the right instructions. If you have already contacted support, we will use your existing messages and photos.